Our Anarchy Airboats EP or Glow Kits are made from laser cut high grade 1/4" Sande plywood for the inside frame and motor
mount, and 1/32" 3-ply high grade model wood for the outside skin. (assembly required).
Building the kit is very easy thanks to the laser cut precision, good for first timers, every frame piece snaps together in place
thigh. The laser cut outside skins glue in place with not much work. The kit includes all the hardware necessary just add your
electronics.
Motor mount "Electric": Designed with universal mount holes and fits most of the brushless out runners motors out there.
Radio Compartment "Electric": Requires (1) standard size servo for steering, 2 Different covers are included one is a
1/32" 3-ply high grade model wood and the other is a 1/16" clear acrylic. Battery compartment area is 49mm wide, 28.5mm
tall and 146mm long.
Propeller "Electric": Propeller max diameter is 6" (propeller not included)
Recommended brushless setup: 2,200kv motor, 6" x 4" propeller, 30amp ESC, 30C or more discharge rate 3S lipo.
Weight and Size "Electric":
Built and sealed without electronics = 1.27lbs
Hull measurements = 16.75" x 10" x 1.75"
Hull w/rudders measurements = 19.5" x 10" x 6.5"
Things that you need: (not included)
1) Glue (CA, Epoxy)
2) Small clamps (to hold the bottom and sides while they bond)
3) Sealer (Epoxy, Silicone, Paint, ETC)
4) Brushless outrunner motor
5) Brushless ESC
6) Radio, Servo, RX "Please read on the compartment area"
7) Battery
mount, and 1/32" 3-ply high grade model wood for the outside skin. (assembly required).
Building the kit is very easy thanks to the laser cut precision, good for first timers, every frame piece snaps together in place
thigh. The laser cut outside skins glue in place with not much work. The kit includes all the hardware necessary just add your
electronics.
Motor mount "Electric": Designed with universal mount holes and fits most of the brushless out runners motors out there.
Radio Compartment "Electric": Requires (1) standard size servo for steering, 2 Different covers are included one is a
1/32" 3-ply high grade model wood and the other is a 1/16" clear acrylic. Battery compartment area is 49mm wide, 28.5mm
tall and 146mm long.
Propeller "Electric": Propeller max diameter is 6" (propeller not included)
Recommended brushless setup: 2,200kv motor, 6" x 4" propeller, 30amp ESC, 30C or more discharge rate 3S lipo.
Weight and Size "Electric":
Built and sealed without electronics = 1.27lbs
Hull measurements = 16.75" x 10" x 1.75"
Hull w/rudders measurements = 19.5" x 10" x 6.5"
Things that you need: (not included)
1) Glue (CA, Epoxy)
2) Small clamps (to hold the bottom and sides while they bond)
3) Sealer (Epoxy, Silicone, Paint, ETC)
4) Brushless outrunner motor
5) Brushless ESC
6) Radio, Servo, RX "Please read on the compartment area"
7) Battery
CLD Anarchy Airboats
Copyright © 2009 C Laser Designs
| Dealers Welcome |
| Electric Version |
$80.00+ S&H
Bare Kit Electric
#CLD00300
(includes push rod and rudder
hardware) Requires assembly
and electronics.
#CLD00300
(includes push rod and rudder
hardware) Requires assembly
and electronics.
Shipping
USA, PR = $10.00
International : $35 Priority 6-10 days
USA, PR = $10.00
International : $35 Priority 6-10 days
Customer Video & Pictures
| Anarchy Brushless Airboat Combo Thanks to 2manytoyZ for the video http://www.2manytoyz.com/ |
2manytoyZ Anarchy Airboat Review
 | |  |
 |